1-1/4'' 120V Electric RIMS (Recirculating Infusion Mash System) Tube Kit with thermowell and 1650 Watt Stainless Steel Element by Stir-Plate at Just Gathering. MPN: 120RIMS_EL. Hurry! Limited time offer. Offer valid only while supplies last. Our RIMS Tube kit is packaged with a complete wiring kit and a 120VAC 1650 watt heating element. And we've done the hard part - we pre-drilled the
Product Description & Reviews
Our RIMS Tube kit is packaged with a complete wiring kit and a 120VAC 1650 watt heating element. And we've done the hard part - we pre-drilled the electrical box and pre-wired the power cord. The Heating Element Parts 1 - 4' 14X3 16 amp power cord with molded on plug-end pre-installed ring terminals standard. 1 - Metal box suitable for wet locations, with hole pre-drilled in the back for your electric heating element. 1 - Metal box lid with gasket and screws, suitable for wet locations. 1 - Water resistant fitting to hold the power cord in place. 1 - 120V, 1650W Low Watt Density fold-back style stainless steel water heater element - pre-mounted and epoxy potted. The RIMS Tube Parts - all ships unassembled!!! 2 - 1-1/4" stainless steel tees 1 - 1-1/4" X 8" stainless steel nipple 1 - 1-1/4" X 1" stainless steel bushing (element mount) 2 - 1-1/4" X 1/2" stainless steel bushings (inlet and outlet) 2 - 1/2" MPT X 1/2" stainless steel nipples (inlet and outlet) 1 - 1-1/4" X 1/4" stainless steel bushing (thermocouple mount) Your RIMS tube must be mounted with the outlet fitting positioned so that the tube will self purge of air when water is flowing.
Features & Highlights
- Complete preassembled 120V RIMS (Recirculating Infusion Mash System) Tube kit with thermowell
- Ships with a 1650 Watt all 304 Stainless Steel Heating Element, including the threaded base.
- This kit ships completely assembled including the pre-mounted heating element, which is epoxy potted for corrosion resistance
- Includes 4 ft power cord pre-assembled to RIMS tube.
- The thermowell port is 0.31" ID and will accept RANCO, DS18B20 and other 1/4" temperature probes - the probe just slides into the open end. Then pack the opening with a cotton ball, or do a more permanent install by gluing the probe in with epoxy or silicone.
Heating & Temperature Control
4.72 x 1.18 x 4.72 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Stir-Plate, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
mpn: 120RIMS_ELSS, ean: 0718117675089,
Our RIMS Tube kit is packaged with a complete wiring kit and a 120VAC 1650 watt all 304 stainless steel heating element. And we've done the hard part - we drilled the electrical box, wired the power cord and pre-assembled the threaded stainless fitt...
mpn: MC-120V, ean: 0758524094196,
Our 120V mash controller has a fully grounded 8 foot power cord with 3 prong plug and socket. Includes a mushroom style on/off and panic stop switch. Designed to work with up to a 2250 watt 120V electric heating element. Because of lower wattage avai...
mpn: MC-120V_TW, ean: 0718117675072,
Our 120V mash controller has a fully grounded 8 foot power cord with 3 prong plug and twist lock 20A socket. Includes a mushroom style on/off and panic stop switch. Designed to work with up to a 2250 watt 120V electric heating element. Because of low...
mpn: EB-120V, ean: 0758524094110,
Our brew kettle controller designed for up to a 6000 watt element to boil up to 12 - 15 gallons of wort with a reasonable time to boil of about 30 minutes. You will need a 240V, 30 Amp circuit (dryer outlet) to run this controller. The controller als...